Webcam
November 4, 2026
—
Webcam too dark in Teams. This mostly happens when the camera is pointing towards a window, or sits at 90º to a strong light source: the auto exposure adapts to the bright background and my face ends up in the dark. Brightness and exposure did not help much, the real deal was adjusting the gamma value with v4l2-ctl.
Contents
Adjust the gamma
Install v4l-utils, set the gamma on the webcam and confirm the new value:
$ sudo apt install v4l-utils
$ v4l2-ctl -d /dev/video0 -c gamma=160
$ v4l2-ctl -d /dev/video0 --get-ctrl=gamma
gamma: 160
--list-ctrls shows every control the camera supports, with its minimum, maximum and default values. On this webcam the gamma goes from 100 to 300 and the default is 100, so 160 brightens the dark areas without washing out the image:
$ v4l2-ctl -d /dev/video0 --list-ctrls
User Controls
brightness 0x00980900 (int) : min=-64 max=64 step=1 default=0 value=0 flags=has-min-max
contrast 0x00980901 (int) : min=0 max=95 step=1 default=0 value=0 flags=has-min-max
saturation 0x00980902 (int) : min=0 max=100 step=1 default=64 value=64 flags=has-min-max
hue 0x00980903 (int) : min=-2000 max=2000 step=1 default=0 value=0 flags=has-min-max
white_balance_automatic 0x0098090c (bool) : default=1 value=1
gamma 0x00980910 (int) : min=100 max=300 step=1 default=100 value=160 flags=has-min-max
gain 0x00980913 (int) : min=1 max=8 step=1 default=1 value=5 flags=has-min-max
power_line_frequency 0x00980918 (menu) : min=0 max=2 default=2 value=1 (50 Hz)
white_balance_temperature 0x0098091a (int) : min=2800 max=6500 step=10 default=4600 value=4690 flags=inactive, has-min-max
sharpness 0x0098091b (int) : min=1 max=7 step=1 default=2 value=2 flags=has-min-max
backlight_compensation 0x0098091c (int) : min=0 max=3 step=1 default=3 value=3 flags=has-min-max
region_of_interest_rectangle 0x00981ae1 (rect) : value=(0,0)/1x1 flags=has-payload, has-min-max
region_of_interest_auto_ctrls 0x00981ae2 (bitmask): max=0x00000001 default=0x00000001 value=0x00000000 flags=has-min-max
Camera Controls
auto_exposure 0x009a0901 (menu) : min=0 max=3 default=3 value=3 (Aperture Priority Mode)
exposure_time_absolute 0x009a0902 (int) : min=10 max=700 step=1 default=156 value=156 flags=inactive, has-min-max
exposure_dynamic_framerate 0x009a0903 (bool) : default=0 value=1
privacy 0x009a0910 (bool) : default=0 value=0 flags=read-only
Make it permanent
The value is lost when the webcam is unplugged or the machine restarts. A udev rule applies it again every time the camera is added. idVendor and idProduct identify the webcam (lsusb shows them) and ATTR{index}=="0" matches only its main video node:
$ lsusb |grep -i webcam
Bus 003 Device 003: ID 0bda:5598 Realtek Semiconductor Corp. Integrated_Webcam_FHD
$ sudo tee /etc/udev/rules.d/99-webcam-gamma.rules << 'EOF'
ACTION=="add", SUBSYSTEM=="video4linux", ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="5598", ATTR{index}=="0", RUN+="/usr/bin/v4l2-ctl -d $devnode -c gamma=160"
EOF
$ sudo udevadm control --reload-rules
This way it works after a restart.
Test without restarting
Put the gamma back to the default value (100), trigger the udev add event and check that the rule set it to 160 again:
$ v4l2-ctl -d /dev/video0 -c gamma=100
$ sudo udevadm trigger --action=add --subsystem-match=video4linux
$ v4l2-ctl -d /dev/video0 --get-ctrl=gamma
gamma: 160